Filter
Top Products
10 C2491M-D (8/06)
REINSTALL CAMERA MODULE
Reinstall the camera module. Refer to Figure 9. Make sure the top of the camera is oriented properly.
On the lens housing, look for the label that says TOP.
Figure 9. Camera Installation
ADJUST POSITION
1. Turn on power to the camera and monitor.
2. Varifocal lens only: Loosen the focal length and focus locking screws (refer to
Figure 10). Adjust according to scene detail. Retighten the screws.
Figure 10. Varifocal Lens Adjustment
3. Adjust the position of the camera.
WARNING: To prevent damage to the camera or lens, the camera must be installed in the
proper hole of the mounting bracket. If the camera is not installed in the correct hole, the
window of the enclosure may be forced against the lens.
WARNING: Heater elements could be hot! When camera power is on, use caution when
adjusting the camera. This applies to all models.
MOUNT CAMERAS WITH
6, 8, AND 12 MM AND
VARIFOCAL LENSES
MOUNT CAMERAS WITH
2.9 AND 3.6 MM LENSES
LOCKING
SCREWS
VARIFOCAL LENS