Filter
Top Products
8 C2477M (6/03)
IN-CEILING INSTALLATION – FIXED CEILING/WALL
Refer to Figure 6 for the following steps.
1. Cut a four-inch diameter hole in the ceiling/wall.
2. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following:
a. Place fingers on the circular marks located on the sides of the surface mount ring.
b. Pinch the sides.
c. Lift and remove the surface mount ring from the back box.
3. Using 3-16 toggle bolts, attach the back box to the mounting surface.
BACK
BOX
3-16 TOGGLE BOLTS
(NOT SUPPLIED)
CEILING/
WALL
Figure 6. In-Ceiling Installation to a Fixed Ceiling/Wall