Filter
Top Products
C486M-C (9/06) 9
Specifications
GENERAL
Construction Material Formed/welded 14 gauge 0.074" (0.187 cm) steel
Finish Poly vinyl powder coat
Environment Indoor (covered); 32˚ to 120˚F (0 to 49˚C)
Unit Weight 13 lb (5.85 kg); 13.76 lb (6.24 kg) with speaker
Security Tamper-resistant screws; N.O./N.C. switch contact on cover. Optional speaker for audio surveillance
MECHANICAL
Window 0.25-inch (0.63 cm) thick impact and abrasion-resistant clear Lexan polycarbonate resin thermoplastic
Camera Mounting Adjustable tilt table
Maximum Camera/Lens Size Accepts camera/lens combinations up to
10.0" L x 3.0" W x 3.0" H (25.40 x 7.62 x 7.62 cm)
Enclosure Mounting Six 0.39-inch (0.99 cm) diameter holes on protected rear surface
Tamper Switch Plunger type door switch with “pull-to-cheat” feature N.O/N.C. contacts clearly marked on body of switch.
DM electrical rating: 10 A, 125 V.
Security Tamper-resistant screws. N.O./N.C. switch contact on cover. Optional speaker for audio surveillance.
ELECTRICAL
Cable Entry Four 0.5-inch (1.27 cm) conduit openings on mounting surface (access through back)
Electrical Connection One six-position terminal block
Tamper Switch 0.25-inch (0.63 cm) quick connect. N.O./N.C. clearly marked on switch body
10 A, maximum switching current
125 V, maximum switching voltage
(Design and product specifications are subject to change without notice.)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
5.66 (14.38)
8.00
(20.32)
4.00
(10.16)
16.00
(40.64)
8.00
(20.32)
12.00
(30.48)
Ø 0.39 (0.99)
MOUNTING
HOLES 6X
0.50 (1.27)
CONDUIT
OPENING 4X