Pelco hs2500 Home Security System User Manual


 
PELCO Manual C486M-B (9/95) 5
6.0 MODELS
HS2500 High security corner mount en-
closure designed to fit flush with
the ceiling. For use in applica-
tions such as elevators, parking
garages, stairwells, detention
cells, etc.
HS2500/SPKR Same as HS2500 except supplied
with factory pre-wired 3-1/2"
(8.89 cm) square speaker for au-
dio surveillance
6.1 OPTIONS
HK8000 Thermostatically controlled
heater kit, 120 VAC. Activates
ON at 40°F (4.44°C) and OFF
at 60°F (15.56°C) and provides
80 watts of heat
HK8024 Same as HK8000 except 24 VAC
operation
HSSPKR Speaker, 3-1/2" (8.89 cm)
square, 12 watts, 8 ohms
HS250010106 Smoked window, 1/4" (.63 cm)
thick, impact and abrasion-resis-
tant Lexan
7.0 SPECIFICATIONS
MECHANICAL
NOTE: Items mentioned apply to both mod-
els of enclosure except where noted.
Window: 1/4" (.63 cm) thick impact and
abrasion-resistant clear Lexan
Camera Mounting: Adjustable tilt table
Maximum Camera/
Lens Size: Accepts camera/lens combina-
tions up to
10.0" L x 3.0" W x 3.0" H
(25.4 L x 7.62 W x 7.62 cm H)
Enclosure
Mounting: Six (6) .390" (.99 cm) diameter
holes on protected rear surface
Tamper Switch: Plunger type door switch with
(Both models) “pull to cheat” feature N.O/N.C.
contacts clearly marked on body
of switch. DM electrical rating:
10A, 125V.
Security: Tamper-resistant screws. N.O./
N.C. switch contact on cover.
Optional speaker for audio sur-
veillance.
ELECTRICAL
Cable Entry: Four (4) 1/2" (1.27 cm) conduit
openings on mounting surface
(access through back).
Electrical
Connection: One six-position terminal block
Tamper Switch 1/4" (.63 cm) quick connect.
(Both models) N.O./N.C. clearly marked on
switch body.
10A, maximum switching cur-
rent.
125V, maximum switching volt-
age.