Filter
Top Products
2 Pelco Manual C494M-D (1/96)
2.0 SCOPE
The information within this manual covers the installa-
tion of the HS2000 High Security Camera Enclosure.
3.0 DESCRIPTION
The HS2000 high security camera enclosure is designed
for indoor “corner mount” installation for such appli-
cations as elevators, parking garages, classrooms, of-
fices, detention cells, etc., requiring maximum protec-
tion from vandalism in an unobtrusive package. De-
signed to fit flush to the ceiling in a corner, an optional
hood (HS2000H) allows the HS2000 to be mounted
lower on the wall and still retain the enclosure’s integ-
rity. An impact-resistant clear Lexan window is sup-
plied, an optional smoked window is available.
Constructed of medium gauge steel, the HS2000 will
accept many of the smaller CCD cameras with fixed
focal length and auto-iris lenses. There is no exposed
mounting hardware securing the HS2000 to its mount-
ing surface. Opening the enclosure can only be accom-
plished by removing the tamper-resistant screw from
the bottom. In addition, a factory-installed tamper
switch is mounted on the secured access cover.
3.1 MODELS
HS2000 High security corner mount enclo-
sure designed to fit flush with the
ceiling. For use in applications
such as elevators, parking garages,
classrooms, offices, detention
cells, etc., requiring maximum pro-
tection from vandalism in an un-
obtrusive package.
HS2000/BR Same as HS2000 except brass
plated finish.
HS2000/CH Same as HS2000 except chrome
plated finish.
3.2 OPTIONS
HS2000H Hood for mid-wall mounting of
HS2000 enclosure.
HS200010019 Smoked window, 1/4" (6.35 mm)
thick, impact and abrasion-resis-
tant Lexan.