Filter
Top Products
C2400M-A (8/99)
HD35/HD3515 Series
Heater and Defroster Kit
®
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2. Only use replacement parts recommended by Pelco.
The product and/or manual may bear the following marks:
This symbol indicates that danger-
ous voltage constituting a risk of
electric shock is present within
this unit.
This symbol indicates that there
are important operating and main-
tenance instructions in the litera-
ture accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
DESCRIPTION
Heater and defroster kits in the HD35/HD3515 Series are designed for enclosures in the EH3500
Series and EH3515L Legacy
®
Series. The HD35 Heater and Defroster Kit is designed for enclosures
only in the EH3508 Series and EH3512 Series. The HD3515 Heater and Defroster Kit is designed
for enclosures only in the EH3515 Series and EH3515L Legacy
®
Series.
These kits contain a thermostatically controlled heater and a continuous-duty defroster. The heater
turns on when the temperature drops to 50°F (10°C) and turns off when the temperature reaches
80°F (27°C).
The heater and defroster are attached to a bracket that replaces the window brackets currently
used to hold the viewing window in place. Because of this bracket, the viewing window size is
reduced to a two-inch (5.08 cm) diameter circle.
The HD3515 Heater and Defroster Kit contains two heaters. You install one heater in the front of
the enclosure and the other heater in the rear of the enclosure. The rear heater is attached to a
rear heater bracket, and the rear heater bracket attaches to the rear of the enclosure. If you are
also installing a blower kit, you install the rear heater bracket between the blower and rear of the
enclosure.
Models
HD35-1 Heater and defroster kit for EH3508 and EH3512 enclosures; 120 VAC; 13 watts
HD35-2 Heater and defroster kit for EH3508 and EH3512 enclosures; 24 VAC; 13 watts
HD35-3 Heater and defroster kit for EH3508 and EH3512 enclosures; 230 VAC; 13 watts
HD3515-1 Heater and defroster kit for EH3515 and EH3515L enclosures; 120 VAC; 23 watts
HD3515-2 Heater and defroster kit for EH3515 and EH3515L enclosures; 24 VAC; 23 watts
HD3515-3 Heater and defroster kit for EH3515 and EH3515L enclosures; 230 VAC; 23 watts
INSTALLATION
The following items are supplied:
1 Heater and defroster attached to the front heater bracket
1 Heater attached to the rear heater bracket (HD3515 Series and HD3515L Series only)
1 PC board
3500 Pelco Way
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120
www.pelco.com