Filter
Top Products
C267M-D (1/08) 3
SPECIFICATIONS
Pan Adjustment 360°
Tilt Adjustment ± 90°
Construction Welded steel
Enclosure Mounting Two 1/4-20 x 0.625 hex head machine screws (supplied)
Suggested Mounting Method Secure to solid surface with three 1/4-inch or one 5/16-inch and
one 1/4-inch diameter fasteners (not supplied) for applications
where wall studs are encountered
Maximum Load 20 lb (9 kg)
Unit Weight 2.75 lb (1.25 kg)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
Ø 0.28
(0.71), 3X
2.88
(7.32)
1.50
(3.81)
Ø 0.343
(0.87), 1X
3.00
(7.62)
11.25
(28.58)
10.75
(27.31)
3.50
(8.89)
5.09
(12.93)
2.84
(7.20)
3.00
(7.62)
1.50
(3.81)
1.73
(4.42)
3.47
(10.41)
Ø 0.50 (1.27)
Ø 0.272 (0.69), 7X
2.00
(5.08)
REVISION HISTORY
Manual # Date Comments
C
267M-C 3/99 Revised to new format.
C
267M-D 1/08 Replaced dimension drawing to illustrate new mounting head hole pattern per ECO 07-17992. Update
d
to new format.
Pelco, the Pelco logo, Camclosure, DigitalSENTRY, Endura, Esprit, ExSite, Genex, Intelli-M, Legacy, and Spectra are registered trademarks of Pelco, In
c.
Spectra III is a trademark of Pelco, Inc. © Copyright 2008, Pelco, In
c.
DLP is a registered trademark of Texas Instruments Incorporated. All rights reserved
.
The materials used in the manufacture of this document and its components are compliant to the
requirements of Directive 2002/95/EC.