Filter
Top Products
14 C2910M-C-QS (4/06)
6.
Fixed focal length lens only:
a. Set the lens focal length to far (
∞
).
b. Adjust the back focus. Move the back focus locking screw on the camera
up or down until the image is focused. As the focus improves, the value
on the FINE FOCUS menu increases: the higher the number, the better the
focus.
c. Adjust the lens focus to achieve the best image. The better the focus, the
higher the number on the FINE FOCUS menu.
7.
Varifocal lens only:
a. Set the varifocal to wide (W) and the lens focal length to far (
∞
).
b. Adjust the back focus. Move the back focus locking screw on the camera
up or down until the image is focused. As the focus improves, the value
on the FINE FOCUS menu increases: the higher the number, the better the
focus.
c. Move the varifocal locking screw up or down to set the field of view.
d. Adjust the lens focus until the highest value possible appears on the FINE
FOCUS menu.
e. Repeat steps c and d until the focus is correct.
8.
Manual iris only:
Adjust the iris for the best picture quality. The largest
aperture gives the best light sensitivity; the smallest aperture gives the
greatest depth of field.
9. Tighten all lens adjustment screws.
10.
Auto iris only:
Remove the ND filter.
11. Select BACK to return to the LENS/VIDEO
SIGNAL menu.
12. If necessary, disable AGC on the LENS/VIDEO
SIGNAL menu.
13. Select EXIT to close the setup menus.
<LANGUAGE>
<LENS/VIDEO SIGNAL>
<CAMERA DISPLAY>
<LIGHT METER>
<WHITE BALANCE>
<PROFILES>
<SYSTEM INFORMATION>
EXIT
MAIN MENU
LENS/VIDEO SIGNAL
VIDEO STANDARD AUTO
AUTOMATIC (AGC) ON
LENS TYPE DC
<LINE SYNC>
<VIDEO LEVEL>
<AUTO IRIS>
<FINE FOCUS>
BACK
EXIT