Filter
Top Products
Pelco Manual C916M (11/90) 1
Please thoroughly familiarize yourself with the information in this manual
prior to installation and operation.
4. Only use replacement parts recommended by
Pelco.
5. After replacement/repair of this unit’s electrical
components, conduct a resistance measurement
between line and exposed parts to verify the ex-
posed parts have not been connected to line cir-
cuitry.
6. The installation methods and materials should be
capable of supporting four (4) times the weight of
the AUX2000.
1.0 WARNINGS
Prior to installation and use of this product, the follow-
ing WARNINGS should be observed.
1. Installation and servicing should only be done by
Qualified Service Personnel and conform to all Lo-
cal codes.
2. Unless the unit is specifically marked as a NEMA
Type 3, 3R, 3S, 4, 4X, 6 or 6P enclosure, it is de-
signed for Indoor use only and it must not be in-
stalled where exposed to rain and moisture.
3. The product may bear the following marks:
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
INSTALLATION/OPERATION MANUAL
AUX2000 AUXILIARY CONTROL BOX
FOR THE COAXITRON
®
AND
WIRETRON RECEIVER/DRIVER
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.