Filter
Top Products
4 Pelco Manual C684M-A (7/01)
® Pelco, the Pelco logo, Spectra, Genex, and Legacy are registered trademarks of Pelco. © Copyright 2001, Pelco
™ Esprit and Camclosure are trademarks of Pelco. All rights reserved.
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective
in material or workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
• Five years on Pelco manufactured cameras (CC3500/CC3600 and MC3500/
MC3600 Series); two years on all other cameras.
• Three years on Genex
™
Series (multiplexers, server, and keyboard).
•Two years on all standard motorized and fixed focal length lenses.
•Two years on Legacy
®
, Camclosure
™
Camera Systems, CM6700/CM6800/
CM8500/CM9500/CM9740/CM9750/CM9760 Matrix, DF5 Series and DF8
Fixed Dome products.
•Two years on Spectra
®
and Esprit
™
, including when used in continuous mo-
tion applications.
•Two years on WW5700 series window wiper (excluding wiper blades).
• Eighteen months on DX Series digital video recorders.
• Six months on all pan and tilts, scanners or preset lenses used in continu-
ous motion applications (that is, preset scan, tour and auto scan modes).
Pelco assumes no risk and shall be subject to no liability for damages or loss
resulting from the specific use or application made of the Products. Pelco’s li-
ability for any claim, whether based on breach of contract, negligence, infringe-
ment of any rights of any party or product liability, relating to the Products shall
not exceed the price paid by the Dealer to Pelco for such Products. In no event
will Pelco be liable for any special, incidental or consequential damages (includ-
ing loss of use, loss of profit and claims of third parties) however caused, whether
by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer
may also have additional rights, which are subject to variation from state to state.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100
or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide
the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall under
the warranty conditions stated above, please include a written explanation with
the product when returned.
Method of return shipment shall be the same or equal to the method by which
the item was received by Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call
the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization number
(CA number if returned for credit, and RA number if returned for repair). Goods
returned for repair or credit should be clearly identified with the assigned CA/RA
number and freight should be prepaid. All merchandise returned for credit may
be subject to a 20% restocking and refurbishing charge.
Ship freight prepaid to: Pelco
3500 Pelco Way
Clovis, CA 93612-5699
WARRANTY AND RETURN INFORMATION
REVISION HISTORY
Manual # Date Comments
C684M 4/01 Original version.
C684M-A 7/01 Revised
Description, Installation,
and
Connections
sections. Added FCC notice.
SPECIFICATIONS
ELECTRICAL/VIDEO
Input Voltage: 100-240 VAC, 50/60 Hz, auto-ranging
Power Consumption: 250W maximum
Recording Resolution
NTSC: 352 x 240 pixels
PAL: 384 x 288 pixels
Compression: MPEG1
Compressed Image Size: 352 x 240; average 1.4 kB
Remote Control: Full remote control via TCP/IP network
MECHANICAL
SCSI Connector: Recorder interface
GENERAL
Operating Temperature: 41° to 104°F (5° to 40°C)
Relative Humidity: Maximum 80% non-condensing
Dimensions
Desktop: 7.3 (H) x 17.0 (W) x 19.6 (D) inches (18.5 x 43.2 x 49.8 cm)
Rack Mount: 7.0 (H) x 19.0 (W) x 19.6 (D) inches (17.8 x 48.3 x 49.8 cm)
Unit weight: 45 lb (20.4 kg) maximum (fully equipped)
(Design and product specifications subject to change without notice.)
REGULATORY NOTICES
This equipment has been tested and found to comply with the limits of a Class A digital de-
vice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.