Filter
Top Products
12 Pelco Manual C505M-B (4/97)
WARNING:
The AC line voltage
used to power the receiver/driver is
the same voltage that is fed through
the pan/tilt into the enclosure as “en-
closure power”, which also supplies
the heaters and blower where appli-
cable. This voltage is not selectable.
INPUT VOLTAGE
24 VAC 120 VAC 230 VAC
Fuse 2 AMP 1 AMP 1/2 AMP
Transformer JP2-JP15 JP2-JP1 JP2-JP1
Primary JP6-JP11 JP4-JP3 JP3-JP5
JP6-JP5 JP8-JP7
JP8-JP7
Pan/Tilt
24 VAC JP13-JP16 JP15-JP16 JP15-JP16
JP9-JP12 JP11-JP12 JP11-JP12
120 VAC * JP17-JP16 JP17-JP16
JP11-JP12 JP11-JP12
230 VAC * * JP4-JP16
JP6-JP12
Camera Voltage
24 VAC JP4-JP14 JP13-JP14 JP13-JP14
JP8-JP10 JP9-JP10 JP9-JP10
120 VAC * JP18-JP14 JP18-JP14
JP9-JP10 JP9-JP10
230 VAC * * JP4-JP14
JP6-JP10
Table B. Strapping Configurations for Universal AC Power Supply
INPUT VOLTAGE
120 VAC 230 VAC
Fuse 1AMP 1/2AMP
Transformer JP2 - JP7 JP2 - JP7
Primary JP9 – JP15 JP8 – JP15
JP10 – JP8 JP17 – JP16
JP17 - JP16
Camera Voltage
24 VAC JP3 – JP4 JP3 – JP4
JP12 – JP13 JP12 – JP13
120 VAC JP1 - JP4 *
JP11 - JP13
230 VAC * JP1 - JP4
JP11 - JP13
* Not a recommended
configuration.
* Not a recommended
configuration.
Table C. Variable Speed Power Supply and Camera Transformer
Strapping Configurations