Filter
Top Products
C3610M-A (1/08) 9
a behavior to a camera as long as there is at least one license available. To assign a behavior to
additional cameras, you must remove a license from an existing camera. The Endura system manager
tracks the number of licenses for each behavior. You cannot assign a behavior to a camera if there are
no remaining licenses.
2. Assign the behaviors as follows:
a. Select a behavior and a camera. If necessary, expand the list of cameras under each encoder
before you assign a behavior to a camera.
b. Click the Assign button.
3. Remove a behavior from a camera as follows:
a. Select a behavior from the Cameras list. If necessary, expand the list of cameras under each
encoder before you remove a behavior.
b. Click the Remove button.
4. Click Save.