Pelco c1964m-b(6/02) Home Security System User Manual


  Open as PDF
of 4
 
Pelco Manual C1964M-B (6/02) 3
QUAD VIEW PLAYBACK
Images Per Second: With preview – up to 15 fps
Without preview – up to 30 fps
Record Time: 8 weeks (1 fps) with 30 GB hard drive
16 weeks (1 fps) with 60 GB hard drive
Playback Mode: Quad view, only
To setup the VIDEO4X4 for quad view playback refer to Figure 2 and do the following:
1. Connect cameras to the S-Video inputs located on the back of the monitor. Video cables
are supplied with the cameras. Set CH (camera) input switches to 75Ω.
2. Use a BNC cable (supplied) and connect MONITOR OUT located on the back of the
monitor to the CAMERA 3 INPUT of the recorder. Set the MONITOR OUT switch to 75Ω.
3. Connect the recorder’s MONITOR OUTPUT to the VIDEO IN located on the back of the
monitor. Use the supplied BNC/RCA adapter to connect the BNC cable to the VIDEO IN
input.
4. Program the VIDEO4X4 system:
a. Set the monitor to VCR mode.
b. Program the DX1004 recorder:
(1.) Set Camera operation for cameras 1, 2 and 4 to OFF.
(2.) Set Camera operation for camera 3 to ON.
(3.) Set the Preview Function.
(4.) Select the resolution for Camera 3.
(5.) Program fps for Camera 3.
Refer to the manuals supplied with the monitor and recorder for programming instructions.
Figure 2. Quad View Playback
NOTE:
Set all monitor termina-
tion switches to 75
Ω
. Set the
monitor output switch to HI.
1
1
2
2
3
3
4
4
OUTPUT
INPUT
CAMERA
ALARM SENSOR
ON OFF
POWER
AC IN
MONITOR
VIDEO PRINTER
NTSC
PAL
NMO TOR
MAIN
A/C INLET
IN
IN/OUT
REMOTE
*
CH 1 CH 2 CH 3 CH 4 TRIG
OUT
IN
OUT
I
CH 1 CH 3 CH 4CH 2
OUT
VIDEO AUDIO
75 Hi 75 Hi 75 Hi 75 Hi 75 Hi
SCREEN
FOCUS
MONITOR
RECORDER
VIDEO IN
00889
 previous