Filter
Top Products
PELCO Manual C430M-E (1/95) 9
Figure 4. Sun Shroud Installation
4.5 SUN SHROUD INSTALLATION
The sun shroud protects the enclosure from the direct
rays of the sun and reduces internal temperature by
approximately 10-15°. To install the sun shroud, per-
form the following steps (refer to Figure 4).
1. Remove the two (2) screws from the front or rear
end cap of the enclosure.
2. Remove the cap.
3. Align the guides on the sun shroud with the runner
on the enclosure.
4. Slide the sun shroud until the bottom guides on the
sun shroud meet the opposite end cap.
5. Put the cap back on the enclosure and fasten down
with the screws.
NOTE: Be sure the screws are tightened down
to secure the seal between the cap and the en-
closure.
5.0 CARE AND MAINTENANCE
Regularly scheduled maintenance will help prolong the
operational life and appearance of the equipment. Clean
the window regularly with a mild nonabrasive deter-
gent in water and with a soft cloth to help maintain
picture clarity.