Filter
Top Products
6 of 7
ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09
F
*For screens with a hole
pattern in a pocket,
spacers (F) go between
adapter plate (A) and
screen.
FOR VESA
®
75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter
plate (A) to back of screen using four M4 x 10 mm
screws (D) as shown below.
*Note: If hole pattern is in a pocket, attach adapter
plate (A) to back of screen using four M4 x 20 mm
screws (E) and four retaining spacers (F) as indicated
below.
Attaching Adapter Plate to Flat Panel Screen
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
D
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter
plate (A) to back of screen using four M4 x 10 mm
screws (D) as shown below.
D
2
A
A