Filter
Top Products
- 13 -- 40 -
TO CHECK BRUSHES:
➢➢
When brushes are worn to the level
of the base support bar, replace the
agitator.
TO REPLACE BRUSH AGITATOR
UNIT
➢➢
Remove POWER NOZZLE cover,
belt and agitator assembly. (See
“REMOVING BELT”).
➢➢
Remove agitator supports,
washers, screws, end brush, brush
sprocket, and brush sprocket
flange from ends of agitator
assembly.
➢➢
Replace agitator assembly.
➢➢
Reassemble agitator assembly.
➢➢
To line up screw holes in dowel,
sprocket and end brush, be sure the
brush portion of end brush lines up
with brushes on brush dowel.
➢➢
Replace belt, agitator assembly and
POWER NOZZLE cover screws.
(See “REPLACING BELT”).
Base Support Bars
Barres de support
de la base
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
WARNING
Brush Servicing
Overload Tools-
POWER Protector Headlight On-Board Cord Length Cord Reel
120V. AC (60Hz)
Yes Yes Yes 20 Ft. (6.1 m) Yes
12.0 A
Protector Almacen-
contra
Extensión amiento
Voltaje subrecargas Luz Herramientas
de cordón del cordón
120V. AC (60Hz)
Si Si Si 6,1 m (20 pi) Si
12,0 A
Protecteur Dispositif Longueur Rappel
Alimentation de surcharge
d’éclairage Accessoires
du cordon du cordon
120 V c.a. (60 Hz)
Oui Oui Oui 6,1 m (20 pi) Oui
12,0 A
FEATURE CHART
Diagrama de características
Tableau des caractéristiques