Filter
Top Products
- 11 -
FEATURE CHART
Power Dirt Sensor Headlight Cord Length Bare Floor
120V AC(60Hz) Yes Yes 35 Ft Yes
Tableau des caractéristiques
Alimentation Détecteur de Dispositif Longueur du Position
poussière d’éclairage cordon plancher
120 V c.a. (60 Hz) Oui Oui 10,7m (35 pi) Oui
DDiiaaggrraammaa ddee ccaarraacctteerrííssttiiccaass
VVoollttaajjee SSeennssoorr ddee LLuuzz EExxtteennssiióónn UUssoo ssiinn
bbaassuurraa ddee ccoorrddóónn aallffoommbbrraa
120 V c.a. (60 Hz)
Si Si 10.7m (35 pi) Si
Extension Hose
Tuyau d’extension
Manguera expansible
Combination Brush
Brosse àépousseter
Cepillo para combinación
Crevice Tool
Suceur plat
Herramienta
para tapices
Quick Release
Upper Cord Hook
Crochet supérieur
de rangement du cordon
à dégagement rapide
Sujetador de liberación
Handle Length
Adjustment
Ajustement de la
longueur de la poignée
Largo, del mango
ajuste
Short Hose
Tuyau court
Manguera corta
Lower Cord Hook
Compartimiento
inferior para el cordon
Crochet de cordon
inférieur
Nozzle
Boquilla
Tête d’aspiration
Belt MC-V360B
Correa
Courroie
- 54 -
Removing Clogs
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢➢
Check the handle and extension
wand area.
➢➢
Remove handle by pressing handle
quick release button.
➢➢
Visually inspect the hose and the
base area into which the hose is
connected.
➢➢
Remove any visible clog.
➢➢
Plug in the vacuum cleaner and turn
it on.
➢➢
Stretch the hose to maximum length
and then allow the hose to return to
its storage length.
➢➢
Turn off and unplug the vacuum
cleaner.
➢➢
Remove dust bin and check for clogs.
➢➢
If the dust bin and filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢➢
Check the clean out port.
➢➢
Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.