- 44 -
Agitator Assembly
E-Clip
Agitator
Pulley
Agitator Shaft
Filter
End Cap
Agitator
Holder
Spacer
Brushes
Brush
Spacers
End Cap
Filter
➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ Remove lower plate. See:
“Removing and Installing Lower
Plate” (page 38).
➢ Cut off any hair, thread, string,
carpet pile, and lint entangled
around agitator with a pair of
scissors.
➢ Remove agitator. See: “Replacing
Belt” (page 40).
➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ Reinstall agitator and lower plate.
See: “Removing and Installing
Lower Plate” (page 38)
Cleaning Agitator