Filter
Top Products
• The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
• To avoid injury, keep your fingers and hands away from the beater bar.
• DO NOT use hot air or hot surface to dry filter. Keep at room temperature for approximately 24 hours.
• IMPORTANT : Before re-installing the washable filter, make sure they are completely dry to avoid damaging the cleaner.
D - MAINTENANCE AND SERVICING / /
How to empty the dust compartment / /
IMPORTANT / /
• Empty the dust compartment when it is full or the suction power seems to be bad.
NOTE / /
• When vacuuming fine dust, such as powder or similar, there may be a loss of suction power. If this happens, empty the dust compartment and check for possible
dust trapped on the filters.
D - 1 Push the dust compartment buckle and pull up the dust compartment from the main body.
D - 2 Rotate the slider for 5 times.
D - 3 Pull out the filter assembly from the dust compartment.
D - 4 Empty the dust compartment.
D - 5 Place back the filter assembly into the dust compartment.
NOTE:
Be sure to use the cleaner with the filter assembly at the dust compartment.
D - 6 Set the dust compartment into the main body. Return dust
compartment buckle to an original position. (Press until it "clicks")
Maintaining the filter assembly / /
D - 7 Unlock the Pre-filter and pull it up as illustrated.
D - 8 Remove the dust accumulated in the filter unit by tapping it against a hard surface lightly.
NOTE:
Don't clean the filter unit by brush or clean it with water.
D - 9 Reinstall the filter unit as per reverse procedure.
6
CAUTION
•
•
•
.
•
.
..
•
•
•
•
•
•
:.
.
.
.
.
:
.
•
•
.
•
•
.
.
.
.
.
D – .
D –
.
D –
.
D –
.
D –
.
:
.
D –
.) .
" "(
D –
.
.D –
D – .
D –
D – .
:
.
D – .) ." "(
D – .
D –
.
:
.
D –
.
D – .
D –
.
:
.
D –
.