Filter
Top Products
- 26 -
Review this table to find do-it-yourself solutions for minor performance problems.
Any other service needed should be performed by a Sears or other qualified
service agent.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
WARNING
Always turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner
.
Failure to do so could result in electrical shock or personal
injury.
BEFORE REQUESTING SERVICE
Vacuum cleaner 1. Unplugged at wall outlet. 1. Plug in firmly, push ON/OFF
won’t start. switch to on. (page 13)
2. Tripped circuit breaker / 2. Reset circuit breaker or replace
blown fuse at household fuse. .
service panel.a
Poor job of dirt 1. Full or clogged dust bin. 1. Empty dust bin. (page 21)
pick-up. 2. Clogged airflow passages. 2. Clear airflow passages. (page 20)
3. Dirty filters. 3. Change/Clean filters.
(page 24, 25)
4. Hole in hose. 4. Replace hose.
5. Dust bin open. 5. Close dust bin until release
button is latched. (page 21)
Vacuum cleaner 1. Tripped thermal protector 1. See PERFORMANCE
starts but shuts off. in canister. FEATURES – “Thermal
Protector.” (page 17)
Cord won’t rewind. 1. Dirty power cord. 1. Clean the power cord.
2. Cord jammed. 2. Pull out cord and rewind. (page 13)