➢
Disconnect vacuum cleaner from
electrical outlet.
➢
Check and remove hair, string and
lint build-up frequently in the POWER
NOZZLE brush and brush support
areas.
➢
If build-up becomes excessive,
disconnect POWER NOZZLE from
wand and follow the steps below.
➢ Turn POWER NOZZLE over.
➢ Unscrew the two (2) POWER
NOZZLE cover screws.
➢ Turn POWER NOZZLE right side up.
➢ Press handle release pedal and
lower the swivel.
➢
To remove cover, grasp the sides and
pull out.
➢
Tilt cover forward from back until
front snaps free.
➢
Depress tabs on rear of agitator
cover and rotate forward to release
from the
POWER NOZZLE
base.
➢ Lift agitator assembly out .
➢ Remove worn belt.
