Filter
Top Products
- 30 -
Suction Control
Régulateur d’aspiration
Control de aspiración
Vacuuming Tips
Suggested sweeping pattern
For best cleaning action, the POWER
NOZZLE should be pushed straight
away from you and pulled straight back.
At the end of each pull stroke, the
direction of the POWER NOZZLE should
be changed to point into the next
section to be cleaned. This pattern
should be continued across the rug with
slow, gliding motions.
➢ Fast, jerky motions do not provide
complete cleaning.
➢ Small areas can be cleaned without
moving the canister.
➢ Carpeted stairs need to be vacuumed
regularly.
➢ For best cleaning results, fully close
the suction control.
FEATURES
Overload Protector
➢ The overload protector stops the
POWER NOZZLE motor when the
brush jams and prevents belt
breakage.
NOTE: Canister motor will continue to
run.
TO CORRECT PROBLEM:
➢ Unplug electrical cord.
➢ Check brush and brush support
areas for excessive lint build-up or
jamming.
➢ Clean jammed area.
TO RESET:
➢ Press reset button on top of the
POWER NOZZLE. Plug in and turn
on vacuum cleaner.
Overload Protector
(Reset Button)
Protecteur de surcharge
(Bouton de remise en circuit
Protector contra sobrecargas
(Botón de restauración)