Filter
Top Products
ASSEMBLY INSTRUCTIONS
➢➢
Slide wands together until wand
button snaps into place.
Cord Holder
Porte-cordon
Sujetador
del cordón
Wand Button
Bouton du tube
Botón del tubo
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or injury.
Wands
➢➢
Insert wands into POWER NOZZLE
until the wand button snaps into
place.
➢➢
Connect POWER NOZZLE plug and
cord as shown.
➢➢
Do not force.
➢➢
Raised area of plug must face
toward hand.
➢➢
If hard to install, turn the plug over
and try again.
To Remove:
➢➢
Disconnect POWER NOZZLE plug
and cord.
➢➢
Steady Power Nozzle with foot and
turn wands until the button
disappears, then pull wands out of
Power Nozzle.
➢➢
Pull wands out of POWER NOZZLE.
Raised Area
Portion en relief
Área elevada
Up and In
H
Vers le haut et à l’intérieur
acia arriba y hacia dentro
Power Nozzle
- 14 -
Slot
Fente
Ranura
Slot
Fente
Ranura