Filter
Top Products
3 Attach the camera to the stand.
R Loosen the screw (
1
).
R Insert the tip of the stand (A) into the
stand attachment hole (B) on the rear
or bottom side.
R Secure the camera by tightening the
screw (
2
).
Attaching to the hole on the rear side
1
1
2
2
Attaching to the hole on the bottom
side
1
2
12
4 Adjust the camera angle.
R Loosen the screw (A), adjust the
camera to the desired angle, and then
tighten the screw (B) to secure the
camera in place.
1 2
20
For assistance, please visit www.panasonic.com/support
Setup