Filter
Top Products
Installing the camera
1 Attach the safety wire to the camera.
R Place the ring of the safety wire (A)
over the screw hole.
R Place a washer (B) on top of the ring
of the safety wire.
R Tighten the screw (C) for the safety
wire on top of the washer.
1
2
3
2 Attach the camera mounting stand to an
outdoor wall.
R Secure the stand to the wall by
tightening 4 screws (A).
R
1
37 mm (1 15/32 inches)
1
1
1
1
Note:
R Use the following template below when
determining the location of the screw
holes.
37 mm
(1 15/32 pulgadas)
37 mm
(1 15/32 pulgadas)
For assistance, please visit www.panasonic.com/support
19
Setup