Filter
Top Products
CAUTION
A heater has hot and arcing or sparking parts inside. Do not use it in areas where
gasoline,paint, or flammable vapors or liquids are used or stored.
IMPORTANT INSTRUCTIONS CONTINUED
Use only on 20 ampere branch circuit.
Do not disassemble the unit for reconstruction. It may cause fire or electric shock.
Never place a switch where it can be reached from a tub or shower.
Do not install with a method which is not approved in the instructions.
Do not use out doors.
To prevent a possible fire, do not block air intakes or exhuast in any manner.
A statement to the effect that when the product is to no longer be used, it must
not be left in place but removed, to prevent it from possibly falling.
3
Do not install this fan heater where air temperature may exceed 40°C(104°F) .
To reduce the risk of fire, electric shock or injury to persons, observe the following:
Use this unit only in the manner intended by the manufacturer. If you have
any questions, please contact the manufacturer.
When cutting or drilling into wall or ceiling, do not damage electrical wiring
and other hidden utilities.
Ducted fans must always be vented to the outdoors.
Celiling joist must be subjected to static load more than five times the weight
of the product.
The special-purpose or dedicated parts, such as mounting fixtures, must be used if
such parts are provided.
Follow all local electrical and safety codes, as well as the National Electrical Code
(NEC) and the Occupation Safety and Health Act (OSHA).
This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers,
clothes, etc. and curtains at least 3 feet(0.9m) from the front of the heater and
keep them away from the sides and rear.
Not to be installed in a ceiling thermally insulated to a value greater than R40.
(This is required for installation in Canada only.)
WARNING