43
Cleaning and Maintenance
Caution
Always unplug the unit before cleaning it. Never touch a power plug with wet hands.
Failure to follow these instructions may lead to electrical shock or burns.
•
Areas covered with synthetic leather
Wipe these areas with a soft, dry cloth.
Do not use any leather maintenance tools that are commercially available (chemical
cloth or chemicals).
This can cause discoloration or hardening of the synthetic leather.
If the synthetic leather is particularly dirty, wipe it in the following manner.
1. Soak a soft cloth in water or a 3% to 5% solution of mild detergent and
wring it out thoroughly.
2. Dab the surface with the moistened cloth.
3. Rinse the cloth in water, wring it out thoroughly, and then wipe any
remaining detergent from the surface.
4. Wipe the surfaces with a soft, dry cloth.
5. Allow to dry naturally.
Do not use a hair dryer to dry the surface more quickly.
Since colors may transfer from clothing to the synthetic leather surface, be careful
when using the unit with clothing such as jeans or colored clothes.
Do not allow these areas to come in contact with plastic for extended periods of time
as this may lead to discoloration.
Do not use thinners, benzine, or alcohol.
•
•
•
•
•
•
Pipe and Plastic Area
1
Wipe the unit with a cloth
moistened with mild detergent
and thoroughly wrung out.
Do not use thinners, benzine, or alcohol.
2
Wipe the unit with a cloth
moistened with plain water and
thoroughly wrung out.
Be sure you thoroughly wring out the cloth first
when cleaning the control panel.
3
Allow the unit to dry naturally.
•
•
Seat Fabric
1
Wipe the seat fabric with a cloth soaked in
mild detergent and thoroughly wrung out.
Do not use thinners, benzine, or alcohol.
2
Use water or a mild detergent and brush
on areas where the seat fabric is
particularly soiled.
Be careful not to brush the fabric too much to avoid damage.
3
Wipe the unit with a cloth moistened with
plain water and thoroughly wrung out.
4
Allow the unit to dry naturally.
•
•
EP30004.indb 43 2007/07/19 13:08:03