11
English
Pre-Program and Quick Massage Characteristics
Shiatsu
Uses mainly Soft Shiatsu,
Tap and Knead actions to
comfortably loosen and
provide relief from tension
held at pressure points.
Recommended
for those
with severe stiffness or
who prefer a stimulating
massage.
Swedish
Uses mainly Swedish,
Hawaiian and Knead actions
to evenly apply muscle-
relaxing strokes all over.
Recommended
for those
who want a gentle relaxing
massage.
Chiro
Uses Full Roll and
Compression to stretch all
your muscles. A kneading
action is applied to a stiff
back and joints to refresh the
posture and strengthen you
against fatigue.
Recommended
for those
who want a fairly strong
massage due to stiff
muscles.
Quick
Covers all areas using a
variety of massage actions,
all in a span of just five
minutes.
Recommended
for those
who want a quick, relaxing
massage.
1
2
4
1
Press the OFF/ON button.
The OFF/ON indicator will come on.
2
Select the pre-program you want.
Please press one of the flashing buttons.
If you press another Pre-Program button or a manual operation button during
your selected pre-program massage, the massage will switch to the newly
selected massage.
Pressing a Pre-Program button automatically moves the backrest and legrest
into massage position.
3
Sit as far back in the seat as possible with your head
centered on the pillow.
4
Adjusting shoulder position
When the shoulder position indicator is flashing, adjust the position of the
massage heads (upper heads) so that they lightly touch the shoulders.
Too high
Correct position
Too low
Lightly touching the
shoulder.
•
Up Down
Press
Press
Appr
o
ximate Height
6.0 ft. (185 cm)
5.2 ft. (160 cm)
4.5 ft. (140 cm)
5-Stage adjustment [up and down approx. 3.9 in. (10 cm)]
It is possible to change the position of the massage heads during the massage.
When it is not possible to correctly adjust the shoulder position, you may have to
slide your body and adjust it again.
•
•
•
•
•
•
•
•
About the Time Indicator
Time Remaining
Approx. 15 min.
Approx. 9 min.
Approx. 3 min.
Displays remaining massage time via flashing LED.
Starts counting down from 15 minutes in increments of approximately 3 minutes.
Flashing speeds up one minute before end of massage.
•
•
•
USING PRE-PROGRAMS AND QUICK MASSAGE