Filter
Top Products
8
How to start group operation
To start group operation
Stop
Power Turn the power supply switch on more than 5 hours before starting operation.
1
Press the SELECT button and select GROUP.
2
Select the ZONE No. including the group to be operated by pressing ZONE button.
3
Select the GROUP No. to be operated by pressing GROUP select buttons .
4
Press the ON button.
5
Set the operation mode by pressing the MODE button.
6
Set the desired temperature by pressing one of the temperature setting buttons .
7
Set the desired fan speed by pressing the FAN SPEED button.
8
Set the airfl ow direction to a specifi c angle or sweep mode.
9 By pressing , select your desired setting.
Individual:
Controls with the remote controller are possible.
Central 1:
Individual ON/OFF operation with the remote controller is inhibited.
Central 2:
Individual ON/OFF, MODE, and Temp, setting operations with the remote
controller are inhibited.
Central 3:
Individual MODE and Temp, setting operations with the remote controller are
inhibited.
Central 4:
Individual MODE operation with the remote controller is inhibited.
• Under Central/Individual settings other than listed above, “CENTRAL” is displayed.
Stop
Confi rming the GROUP No. to be selected, press the OFF button.
• The fl ap setting can be performed only for units that have no remote controllers.
• AUTO Depending on the difference between the temperature setting and
Operation: the room temperature, heating and cooling alternate automatically so that a uniform
room temperature is maintained.
NOTE