Panasonic CU-S22NKU-1 Air Conditioner User Manual


 
56
13.2 Remote Control Button
13.2.1 SET Button
To check remote control transmission code and store the transmission code to EEPROM
o Press “Set” button continuously for 10 seconds by using pointer
o Press “Timer Set” button unit a “beep” sound is heard as confirmation of transmission code change.
13.2.2 RESET (RC)
To clear and restore the remote control setting to factory default.
o Press once to clear the memory
13.2.3 RESET (AC)
To restore the unit’s setting to factory default.
o Press once to restore the unit’s setting
13.2.4 TIMER
To change indoor unit indicators’ intensity:
o Press continuously for 5 seconds.
13.2.5 TIMER
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
o Press continuously for 10 seconds.