![](http://pdfasset.owneriq.net/9/63/9632326a-7500-43d7-89a5-e7bd014467be/9632326a-7500-43d7-89a5-e7bd014467be-bg23.png)
35
10.1.3.8 Wire Stripping and connecting requirement
10.1.3.9 Cutting and flaring the piping
1 Please cut using pipe cutter and then remove the burrs.
2 Remove the burrs by using reamer. If burrs is not removed, gas leakage may be caused. Turn the piping end
down to avoid the metal powder entering the pipe.
3 Please make flare after inserting the flare nut onto the copper pipes.