Panasonic CU-KS24NKUA Air Conditioner User Manual


 
8
REMOTE CONTROLLER
The illustration above pictures the remote controller after the cover has been
opened.
Transmitter When you press the buttons on the remote controller, the mark appears in the
display to transmit the setting changes to the receiver in the air conditioner.
Sensor A temperature sensor inside the remote controller senses the room temperature.
Display Information on the operating conditions is displayed while the remote controller is
switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are
not displayed.
QUIET button : When you press this button, the fan rotates slower than the fan speed
setting to provide a quieter operating sound.
ON/OFF operation button This button is for turning the air conditioner on and off.
1 HR. TIMER button
(1-HOUR OFF TIMER)
: When you press this button, regardless of whether the unit is operating or
stopping, the unit operates for one hour and then shuts down.
Transmitter
Sensor
(Cover closed)
Display
FAN SPEED selector button
FLAP button
ON TIME
setting
buttons
Return button
Advance button
CANCEL button
SENSOR button
CLOCK button
ACL button
ON/OFF operation button
1 HR. TIMER button
Temperature setting buttons (TEMP.)
MODE selector button
Advance button
NIGHT SETBACK button
HIGH POWER button
OFF TIME
setting
buttons
Return button
QUIET button
ADDRESS switch
Temperature display
selector button
Time display selector button
NOTE