9
• To set the power nozzle for hard surfaces, push the
oor surface selector switch to “OFF” (L). This setting
provides suction and no brushroll action.
Brushroll
• The Brushroll Foot Switch is located on top of the
Power Nozzle (M). Both switches must be turned on to
activate the agitator brushroll.
• Floor Surface Selector Switch (L)
- plus -
• The Brushroll Foot Switch (M)
Carpet Height Adjustment & Indicator
• The power nozzle has a carpet height adjustment. The
indicator (O) shows what the nozzle is set on. There are
6 levels. Number 1 is used for short pile carpet and 6 is
for deep pile. Press the pedal to adjust nozzle height up
or down. (N)
Use