Oreck BR1000 Electric Heater User Manual


 
Maintenance
.
Trouble-
shooting
.
1
2
3
4
CABINET CARE & CLEANING
To maintain the furniture quality cabinet, use any commercial dusting or
polishing product.
FILTER MAINTENANCE
The heater comes equipped with a lifetime washable Polytron Filter. The
filter is easy to clean, and the manufacturer recommends that it be cleaned
once a month or as needed. To clean:
Unplug unit then remove the filter from the rear of the unit.
Run warm water through the filter in the opposite direction to the
airflow until the filter is sufficiently clear of dirt and dust.
Shake the filter until all the excess water is removed.
Replace the filter.
NOTE: A mild detergent may be used to clean the filter if water alone does
not clean it sufficiently.
Why does the fan not turn on?
A. Give the heating chamber 1 minute to warm-up before the fans turn on.
B. Check the fuse or circuit breaker in your home.
Why does the blower fan keep running after I’ve turned the fan off?
The blower fan will continue to run until the heat chambers have cooled
down. After a few minutes the fans will shut off automatically.
Why has the heater’s air flow seem to have diminished?
Make sure the intake is not blocked and that the filter is clean. Follow the
“Filter Maintenance” procedure above.
Once the unit is initially turned on, how long will it take to heat my
room?
Generally less than 1 hour. Please remember with any heating process there
are many variables: size of the room, how well the room is insulated, how
many doors and windows, the opening and closing of doors, and how high
the ceilings are.
6
ENGLISH