Oreck BR1000 Electric Heater User Manual


 
Extensive testing has verified the safety of the technology used in SR1500,
SF1500 and the BR1000 zone heaters. Safe, clean Infrared Quartz Heating
Elements provide the heat; there is no combustion or fumes.
This heater is for use on 120 volts. The cord has a plug as shown in Figure A
below. An adapter as shown in Figure B is available for connecting three-blade
grounding-type plugs to two-slot receptacles. The green grounding plug
extending from the adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be used if a three-slot
grounded receptacle is available.
4
Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or relocatable power tap (outlet/power strip).
Do not place the heater near a bed because objects such as pillows or
blankets can fall off the bed and be ignited by the heater.
SAVE THESE INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
IMPORTANT INSTRUCTIONS!
Grounding Method
GROUNDED
OUTLET BOX
GROUNDING
PIN
Sketch A
Sketch B
METAL
SCREW
GROUNDED
OUTLET
ADAPTER
ENGLISH