Omnitron Systems Technology DJ-40 Window User Manual


 
17
5.3 Rearpanel
www.omnitronic.com
OMNITRONIC
®
10 V AC
OMNITRONIC SHOWEQUIPMENT GmbH, GERMANY
Typ/Type:
Spannungsversorgung/
Power supply:
Gesamtanschlusswert/Power
consumption:
OMNITRONIC DJ-40
10VAC,1A~
10 VA
CAUTION
Read manual before use. To prevent electrical fire and shock hazard,
do not expose this appliance to moisture. Risk of electric shock!
Do not open!
Vor Gebrauch Anleitung lesen. Gerät vor Feuchtigkeit schützen.
Gefahr! Gerät nicht öffnen!
Lire le mode demploi avant lutilisation. Afin de prévenir tous risques
d’électrocution et de court-circuits, ne pas exposer à lhumidité.
Attention! Ne pas ouvrir le boîtier!
There are no serviceable parts inside the device.
Im Geräteinneren befinden
sich keine zu wartenden Teile.
L'intérieur de l'appareil
ne contient pas de parties nécessitant un entretien.
MASTER REC
OUTPUT
L
R
L
R
L
R
GND
LINE 3LINE 4
CH-2
LINE 1 PHONO 1PHONO 2 LINE 2
CH-1
(18) GND (Ground terminal)
Connect the ground lead of the turntable with this terminal. This helps to reduce humming and pop noise.
(19), (20) LINE / PHONO INPUT-SOCKETS
Input socket for CH-1 and CH-2. Connect your turntable(s) with the PHONO input-sockets. CD-players or
Tape Decks should be connected with the LINE input-sockets. Line level musical instruments with stereo
outputs such as Rhythm Machines or Samplers should also be connected with the LINE input-sockets.
(21) REC OUT
To connect your recording unit.
(22) MASTER OUT
Output sockets for connecting your power amplifier.
(23) AC-CONNECTION
Used to plug the power-unit in.
6. PROBLEM CART
PROBLEM: CAUSE: REMEDY:
No power. • The power-cord is not connected. • Check the power-cord and any extension-
cables.
No sound. • The PHONO/LINE-switch of the respective
channel is in the wrong position.
• The power-cord of the respective device is
not connected properly or not connected at
all.
• The connection-socket or the plug is dirty.
• Put the PHONO/LINE-switch into the
correct position.
• Check the power-cord and if the plugs are
tightly connected with the sockets.
• Clean the socket and/or the plug.