Filter
Top Products
759 mm (29 7/8")
200 mm
(8")
FRONT VIEW
625 mm
(24 5/8 ")
1055 mm
(41 1/2")
508 mm
(20")
172 mm
(6 3/4")
INLET SIDE
DRAIN CONNECTION
DIMENSIONS 1200DDPOOL mm (inches)
200 mm
(8")
1055 mm
(41 1/2")
508 mm
(20")
159 mm
(5 7/8")
MOUNTING POINTS
CONTROLS
DISCHARGE SIDE
EXHAUST AIR
TO OUTSIDE
EXHAUST AIR
FROM POOL
SUPPLY AIR
TO BUILDING
SUPPLY AIR
FROM OUTSIDE
NOTE:
Service clearance
is 760 mm (30 in.)
from front
access doors
POOL AND
DEFROST AIR
263 mm
(10 3/8")
263 mm
(10 3/8")
All units conform to CSA and UL standards. WARRANTY
Units carry a 15 year warranty on the heat recovery cores
and a 2 year replacement parts warranty.
AIRFLOWS (Each Air Stream)
613 (1300)
566 (1200)
518 (1100)
472 (1000)
423 (900)
378 (800)
329 (700)
282 (600)
235 (500)
AIRFLOW L/s (CFM)
25 (.1) 50 (.2) 75 (.3) 100 (.4) 125 (.5) 150 (.6) 175 (.7)
EXTERNAL STATIC PRESSURE IN PASCALS (in. W.C.)
TOTAL CURRENT DRAW (AMPS) @ 120 VAC
7.8 MED
8.1 HIGH
7.1 LOW
70%
60%
50%
235
(500)
282
(600)
329
(700)
TEMPERATURE EFFECTIVENESS
AIRFLOW IN L/s (CFM)
EFFECTIVENESS
HIGH SPEEDHIGH SPEED
MED SPEEDMED SPEED
LOW SPEEDLOW SPEED
378
(800)
423
(900)
472
(1000)
566
(1200)
518
(1100)
NOTE: Exhaust Relative Humidity (RH) at 40%
PERFORMANCE
Model 1200DD POOL
TI -121
1203
SPECIFICATIONS
CORES
Modular (3 section) patented aluminum heat recovery cores arranged
for efficient cross-flow ventilation. Meets the flame spread and smoke
developed classifications of the National Building Code and NFPA 90A
(1993 Edition).
MOTORS
Two PSC, 3 speed double shafted, 120 VAC, 4 Amps each (8.1 total
on high speed). HP - 1/4, 1625 RPM. Watts - total on high speed -
972.
FILTERS
Washable air filters in exhaust and supply air streams.
BLOWERS
Centrifugal type rated at 1200 cfm (566 L/s) free air delivery. Each air
stream has one double shafted motor driving a centrifugal blower.
CONNECTION DUCT SIZES
Five - 20" x 8" H (508 mm x 200 mm H).
MOUNTING
Unit to be set on support brackets hung by threaded rod type
apparatus. (brackets and rods not provided).
CASE
20 gauge prepainted galvanized steel (G60) for superior corrosion
resistance. Insulated with foil faced insulation duct liner where required
to prevent exterior condensation. Drain connections; two - 1/2" (12
mm) O.D.
CONTROLS
Illuminated power switch, 3 speed blower control, low voltage (24 VAC)
terminals for connection of remote dehumidistat (supplied) and defrost
light indicating automatic operation.
DEFROST CONTROLS
Supply bypass damper routes indoor air to defrost core.
WEIGHT 191 lbs. (87 kg) SHIPPING WEIGHT 215 lbs. (98 kg)
DATE: ___________________________________________PROJECT: _________________________________________
MECHANICAL CONTRACTOR: _________________________________________________________________________
4