Nortec NH Series Humidifier User Manual


 
10-10
Page 17
2008-08-28
Table 4. Recommended Condensate Line at Distributor(s)
Dispersion Method Condensate Hose Copper Tube (Potable)
Stainless Steel Tube
(RO or DI)
1 x Steam Distributor
0.375 inch
NORTEC 132-8840
0.250 inch. MED-L Tubing
(0.375 inch OD)
0.375 Tube 0.049 inch thick
3 x Steam Distributor
0.375 inch
NORTEC 132-8840
0.500 inch. MED-L Tubing
(0.875 inch OD)
0.650 Tube 0.049 inch thick
Note: *When using more then 1 steam distributor, the condensate line must be trapped before it is
joined together. See figure 4
Table 5. Equivalent Lengths of Elbows and Tee Fittings
Nominal Tube
Diameter
Standard 90degree
Elbow
Standard 45 degree
Elbow Side Outlet Tee
0.750 / 0.875 in. 2 ft. 1 ft. 4 ft.
1.500 / 1.750 in. 3 ft. 6 in. 1ft. 9 in. 7 ft.
2.000 / 2.500 in. 4 ft. 6 in. 2 ft. 3 in. 10 ft.
Table 6. Humidifier and Distributor Inlet/Outlet Sizes
Humidifier Steam Outlet Distributor Steam Inlet
NH 5-30 0.875 in. OD ASD, BSD 0.875 inch OD
NH 50-100 1.75 in. OD CSD 1.75 inch OD
NH 150-200 Two 1.75 in. OD
Blower Pack
0.875 inch OD or
1.75 inch OD
SAM-e 1.75 inch OD*
mini SAM-e 0.875 or 1.75 inch OD**
NOTE: * SAM-e may have multiple 1.75 in. inlets depending on order.
** mini SAM-e inlet is determined on order and may have two 1.75 in. OD inlets.