Nordyne M1M Furnace User Manual


 
3
!
WARNING:
Do not use this appliance if any part
has been submerged under water.
Immediately call a qualified service
technician to inspect the appliance
and to replace any part of the control
system and any gas control that has
been submerged underwater.
NOTICE TO INSTALLER
Installer is advised to follow carefully all instruc-
tions and warnings in this manual to insure
maximum performance, safety, and operating
efficiency of these appliances. Improper instal-
lation may create hazardous conditions, and
will void the appliance warranty.
1.SPECIFICATIONS
General Description
M1 Series gas and oil furnaces are listed direct
vent (sealed combustion), downflow heating
appliances for manufactured (mobile) homes,
recreational vehicles, and for use in residential/
modular/commercial construction. The furnace
must be located so that venting can be properly
achieved.
Air conditioning may be added to structures with
M1 series furnaces using Platinum series air
conditioning or conventional units. This Instal-
lation Instruction manual includes special re-
quirements for incorporation of air conditioning
equipment to the M1 series of furnaces.
Multi-speed blower assemblies as shown in
Table 3 have been certified for field installation
in M1 Series furnaces. An air conditioner can be
easily field installed with M1GH Series furnaces
if used in conjunction with certified 2-wire relay
box, p/n 903092A or 4/5 wire relay box 902898A.
2.OWNER INFORMATION
ABOUT YOUR CENTRAL
FURNACE SYSTEM
NORDYNE has been involved in the design of
products for the manufactured home industry
since the first manufactured home or trailer was
built.
NORDYNE originated the sealed combustion
system, which separates the furnace combus-
tion system from the living area of the home,
now a standard for the manufactured home
industry.
NORDYNE engineers developed the first cen-
tral heating system and the first central air
conditioner for manufactured homes.
NORDYNE is dedicated to bringing to its cus-
tomers the finest heating and cooling comfort
possible. NORDYNE constantly seeks to fur-
ther refine its products to continuously provide
exceptional comfort.
Follow the instructions in this booklet carefully
and this appliance will provide many years of
superior performance.
If you wish to cool your home automatically with
a central air conditioning system investigate the
excellent NORDYNE cooling systems avail-
able from your heating and cooling contractor.
These systems are designed to work best with
your NORDYNE furnace and have been care-
fully engineered to deliver optimum performance
when mated with NORDYNE manufactured
home furnaces.
NORDYNE also offers water heaters, fire-
places and ventilating systems specifically de-
signed for manufactured housing applications.
Check with your manufactured home retailer,
your heating and cooling contractor or your
distributor for information. Write directly to the
factory (PO Box 46911, St. Louis, MO 63146)
if you are not able to locate a source for
NORDYNE manufactured housing products in
your area.
3. MANUFACTURER WARRANTY,
OWNER’S RESPONSIBILITIES
It is the sole responsibility of the homeowner to
make certain the gas furnace has been cor-
rectly set up and converted to the proper fuel
(L.P. gas or Natural gas) and adjusted to oper-
ate properly. All gas furnaces are manufac-
tured for Natural gas and must be field con-
verted when using L.P. gas.
A warranty certificate with full details is included
with these instructions. However, NORDYNE
will not be responsible for any costs found