Filter
Top Products
Installation Guide for Gigabit TX/SX Tap
6
Specications
Splitter Specications:
Split Ratio: 50/50
Fiber Type: Multimode Corning 62.5/125µm, wavelength 850nm
Insertion Loss: Network Port: ≤ 4.5 dB
Monitor Port: ≤ 4.5 dB
Operating Specications:
Operating Temperature: 10˚C to 55˚C
Storage Temperature: 0˚C to 70˚C
Relative Humidity: 10% min, 95% max, non-condensing
Mechanical Specications:
Power Supply: Input: 100-240 VAC, 47-63 Hz, 0.5A
(AC100-125V, 50-60Hz, 30VA for Japan)
Output: 12V, 1.5A (5V, 2.4A for UK and Japan)
Dimensions: 1.125" high x 6.5" deep x 4.5” wide
Connectors:
(1) Duplex SC connector (monitoring port)
(2) RJ45, 8 pin connectors (network ports)
Cable Interface:
Copper Cable Type: 22-24 AWG unshielded twisted pair cable, CAT5E
Fiber Optic Interface:
Laser: Class I, eye-safe, laser emitter type. These Class I Lasers conform
to the applicable requirements per US 21 CFR (J) and EN 60825-1, also
UL 1950 applications.
Optical Transmitter Wave Length: 850 nm nominal
Output Power: -9.5 dB min, -4.0 dB max
Optical Receiver Input Sensitivity: 0 dB min, -17 dB max