Filter
Top Products
7
CLEANING AND MAINTENANCE
Before starting any cleaning or maintenance, always turn-off and unplug the unit.
Regular cleaning and maintenance is recommended every 2-3 months.
After unplugging, carefully lay the unit down face-up. Disassemble the unit in sequence of 1 to 5
as shown below. (Put the unit back together in the reverse 5 to 1 sequence.)
1. Remove the Front Face Plate
3. Remove the Washable Plasma Dust Filter
4. Remove the HEPA/Activated Charcoal Filter
2. Remove the Washable Pre-Filter
Disassembling the Newport 9000
5. Remove the TiO2 Filter
Hold the clips of bothsides to help pulling
out the filter.
.
.
.
Advanced PureAir Newport 9000 Owner’s Manual
TM