Filter
Top Products
18
Fig. 3.5 Pilot bearing installed in crankshaft.
5. Place the flywheel on the crankshaft mount and install the new
crankshaft bolts. (part 12315-D0210)
Fig. 3.6 Flywheel installed.
6. Apply grease to clutch splines.
7. Install the clutch with tool springs facing outward.
8. Install the pressure plate and bolts.
9. Tighten pressure plate bolts in a two step numerical order. (see
illustration) For the first step use 7-14 ft-lbs of torque. For the
second step use 16-22 ft-lbs of torque.
Fig. 3.7 Clutch pressure plate torque sequence.