Filter
Top Products
4
INSTALLING THE CAM-PB
1. Use the appropriate hardware to securely mount the CAM-PB’s bracket to the desired mounting
surface (see Figure 1).
2. Using the male RCA-to-female F adapter included with the CAM-PB, connect the camera to the
RG-6 or RG-59 coax cable previously run.
3. When remotely powering the CAM-PB:
a. Remove the power connector from the power supply (included) and the CAM-PB
as shown in
Figure 2.
1. Mount base
w/screws
2. Attach &
tighten
3. Screw camera
to mount.
Lock w/nut
Remove
Red
Black
+
–
Stripe = +
12VDC
RG6 or
RG59
Coax
Male RCA to
Female F
connector
To video display,
Z880, MOD3000 etc.
Supplied with CAM-PB
Rear View
Proper
orientation
of cable
Figure 1
1. Mount base
w/screws
2. Attach &
tighten
3. Screw camera
to mount.
Lock w/nut
Remove
Red
Black
+
–
Stripe = +
12VDC
RG6 or
RG59
Coax
Male RCA to
Female F
connector
To video display,
Z880, MOD3000 etc.
Supplied with CAM-PB
Rear View
Proper
orientation
of cable
Figure 2
DS00475ACN-0 CAM-PB small.indd 6 1/11/06 11:24:48 AM