Filter
Top Products
NTI KEEMUX Series PS/2 KVM Switch
15
Edit Mode
Edit Mode allows the user to modify the names of the CPUs connected to the switch. Names of CPUs can be up to 12 characters
in length. To enter Edit Mode press <Ctrl> + <E> from Command Mode. When in Edit Mode, multiple keystroke combinations
are not valid (<SHIFT>+<P>, <CTRL>+<P>, <ALT>+ <P>, and <P> will all type a “P” to the display - lower case letters cannot be
typed). After changes have been made the user will be prompted by the menu to save the changes. Answer "Y" to save changes
and answer "N" to continue using previously entered port names.
Function: Keystroke:
Move cursor one position
to the right
Move cursor one position
to the left
Previous port
Next port
Selects the first port on
the switch
Selects the last port on
the switch
Figure 12- Edit Mode screen
Toggles between insert
and overstrike
Erase current character
Erase previous character
When finished making changes in Edit Mode, press <Enter> and a prompt will appear to press either <Y> to save the changes or
<N> to continue making changes without saving the changes just made. If the <ESC> key is pressed instead of <Enter>, all
changes made will be cancelled and the display will return to the previous menu.
Home
End
Insert
(The character either gets inserted and the remainder of the name
gets shifted to the right, OR the current character gets overwritten.)
Delete
Backspace