Filter
Top Products
10
W415-0547 / C / 07.25.06
USE GD201 PERISCOPE KIT
BELOW GRADE INSTALLATION
MAXIMUM 10FT VENT LENGTH
OF HORIZONTAL
REGARDLESS
VENT LENGTH
24" MINIMUM
12"MINIMUM
Use the GD201 periscope kit to locate the air termination
above grade. The periscope must be installed so that when
fi nal grading is completed, the bottom air slot is located a
minimum of 12 inches above grade. The maximum allowable
vent length depends on the fi replace, as illustrated.
FIGURES 3 a-c
FIGURE 4
TYPICAL VENT INSTALLATIONS
SPECIAL VENT INSTALLATIONS
40FT
MAX
3FT
MIN
16"
NOTE:
When terminating vertically above 15', the
restrictor plate must be in the fully closed po-
sition. Refer to Restricting Vertical Vents.
PERISCOPE TERMINATION