Filter
Top Products
W415-0469 / A / 01.04.05
12
Method 2:
1. Remove the two screws holding the glass retainer and
pull forward to remove the glass. Place the glass and re-
tainer in a safe spot.
2. Remove the five screws holding the defuser screen. Pull
the top two corners in towards the center and remove from
the unit.
3. Remove the four screws that hold the flame effect in
place and remove.
4. Repeat steps 3 through 1 to re-assemble the unit.
There are two methods to gain access to the rating plate,There are two methods to gain access to the rating plate,
There are two methods to gain access to the rating plate,There are two methods to gain access to the rating plate,
There are two methods to gain access to the rating plate,
located behind the access panel.located behind the access panel.
located behind the access panel.located behind the access panel.
located behind the access panel.
Method 1:
1. If the unit is not secured to the floor, turn the unit around
to view the access panel.
2. Remove the four screws securing the access panel.
RATING PLATE LOCATION