Filter
Top Products
PAGE 42 — C-30HDN PUMP — OPERATION AND PARTS MANUAL — REV. #11 (03/29/12)
C-30HDN PUMP — MAINTENANCE (PUMP)
Figure 29. Bearing/Cam Bushing Installation
Bearing Installation
1. Install the bearing components on the crankshaft making full
contact with the back side of the crank disc as indicated the
symbol #. See Figure 25 below.
2. Install the bushing in the cam weldment and slide it onto the
crankshaft until contact is made with the bearing spacer.
3. Tighten the 3
allen head bolts
“A” while exerting pressure
on the bushing towards the bearing spacer.
It is important that the
Bearing
Assembly
is installed properly.
NOTE