Filter
Top Products
6
Exhaust filter
The exhaust filter should be cleaned every
time the dust canister is emptied.
This filter is located beneath the On/Off
button ‚ and the automatic cable rewind
button · on the rear of the unit.
1 To access the exhaust filter, lift the exhaust
filter cover release latch Ê L1 and lift off
the filter cover L2.
2 Pull the tab towards you to remove the
exhaust filter M.
3 Tap the filter clean over a dust bin to remove
the dust N.
The filter may be rinsed in warm water but
must be thoroughly dry before re-use.
Allow to air dry for 24 hours before replacing.
4 Replace the filter back into the main unit and
reattach the cover.
MAINTENANCE
WARNING: The power cable must be
disconnected before all maintenance and
cleaning procedures.
Cleaning
Your cleaner is manufactured to withstand
normal day-to-day use, but an occasional
wipe over will help maintain its good looks.
Abrasive cleaners should not be used.
Blockages
1 Switch off the vacuum cleaner and remove
the plug from the electrical outlet.
2 To disconnect the hose Ò from the vacuum
cleaner, turn the hose connector Ì
clockwise, then pull the hose away from the
unit.
3 Remove any blockages then re-connect the
hose securely.
HELPLINE
If you have any difficulty with your appliance,
do not hesitate to call us.
We are more likely to be able to help than
the store from where you bought it.
Please have the following information ready
to enable our staff to deal with your query
quickly.
• Name of the product
• Model number as shown on the underside of
the appliance.
• Serial number as shown on underside of the
appliance.
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
WEBSITE
You may also contact us through our
website, or visit the site to browse and
purchase appliances, spare parts and
accessories from the extensive Morphy
Richards range.
UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119
N
L2L1
M
VC73240MUK Rev1_Instruction Booklet 09/02/2011 16:39 Page 6