Filter
Top Products
3
For details of other Morphy Richards products, please see our website:
OPERATING THE APPLIANCE
1 Fit the hose to the cleaner by inserting the
hose connector Ì into the hose inlet fi and
turning it anti-clockwise until it locks into
place A.
To remove, turn clockwise.
2 Attach the metal telescopic tube Á to the
hose handle Ó.
Extend the telescopic tube to the required
length by pressing down the tube release
button Ë and pulling out the tube B.
3 Attach the combination floor nozzle Î to the
telescopic tube C.
Use the brush height adjustment switch Ï
to switch between two positions:
• Brush up for carpets, rugs etc.
• Brush down for hard floors, tiles etc.
4 Pull out the power cable ‰ to its full length
and plug in to the mains supply.
A yellow
mark on the power cable indicates the
recommended cable length. Do not pull out the
cable beyond the red mark.
5 Switch on by pressing the On/Off button ‚.
To switch off, press the On/Off button again.
6 After use, unplug and press the automatic
cable rewind button · to retract the power
cable.
WARNING: When using the automatic
cable rewind button, always hold the plug
as the power cable will rewind quickly.
Using & cleaning the turbo
nozzle
(certain models only)
When vacuuming
pet hair, stairs and
upholstery, a
ttach the turbo nozzle
Ú
to either
the hose handle
Ó
or the
telescopic tube Á
as described in ‘Operating the appliance’.
IMPORTANT: Do not use the turbo nozzle on
suede and leather surfaces.
Following use, hair or fibres may become
wrapped around the brush bar, reducing the
performance. To remove:
1 Switch the vacuum cleaner off and disconnect
the power plug
‰
from the electrical outlet.
2 Lay the turbo nozzle on a flat surface and turn
over to expose the brush bar.
3 Using a pair of scissors, carefully cut through
any threads or hairs wrapped around the brush
bar
D
.
If large particles are picked up, they may
become trapped in the turbo fan and stall the
brush bar. Open the fan cover to remove the
trapped item.
B
C
D
A
Fan cover
VC73240MUK Rev1_Instruction Booklet 09/02/2011 16:39 Page 3