Morphy Richards VC720506MUK Carpet Cleaner User Manual


 
8
This function is ideal for cleaning vertical
surfaces and hard to reach places.
1. Ensure the cleaner is turned off by pressing the
On/Off power button (15), and the plug is
disconnected from the mains supply.
2. If using from storage, release the power cord (4)
from the cord storage hooks (3 & 6) (see step 3
of ‘Using in upright steam cleaning mode’, page
6, but do not secure the power cord in the cord
holder
(2)).
3. Release the handle (1) from the portable steam
cleaner (10) by pressing the handle release
button
(8), then lift the handle out from the
handle dock
(5).
4. Next, release the floorhead (22) from the
portable steam cleaner by pressing the
floorhead release button (23), then pull the
floorhead out from the steam outlet (21) on the
bottom of the portable steam cleaner.
5. Attach the shoulder strap (36) to both of the
shoulder strap hooks (7 & 26) on the portable
steam cleaner, ensuring they are securely
attached.
Using the portable steam cleaner
6. Attach the extension hose (33) by pushing the
extension hose connector (32) into the steam
outlet on the bottom of the portable steam
cleaner. Guide the ridge on the extension hose
connector into the groove inside the steam outlet.
7. Attachments (34, 37, 38 & 39) can now be pushed
firmly onto the nozzle end of the extension hose.
NOTE: The portable cleaner is designed to be
carried by hanging the shoulder strap over your
shoulder. Ensure the cleaner body remains
upright throughout use (as shown - the arrows
denote the direction of the steam flow) - this will
enable it to produce steam correctly. Holding
the steamer horizontally or upside down may
prevent steam from being produced, or
alternatively being emitted directly at your body.
At the start of each use, water may drip from the
extension hose - this is normal.
Warning
WARNING: Switch OFF and unplug before
changing nozzles. After use, nozzles will be
very hot, allow to cool before handling.
Never block any nozzle eg by holding against a
surface being cleaned.
Only ever use demineralised, deionised or
distilled water to prevent limescale forming.
VC720506MUK Rev1_Instruction Book 09/01/2014 16:42 Page 8